| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Electric tractor configuration sheet | ||
| Electrical system | Motor | Permanent magnet synchronous drive motor 70W |
| Battery | Lithium iron phosphate battery 140KWH ; Warranty for 3 years | |
| Controller | Permanent magnet synchronous AC controller | |
| Charger | Dc charging pile (optional car charger) | |
| Charging time | According to the size of the charging pile (optional car charger about 10 hours) (discharge rate of 80%) | |
| Technical parameter | L*W*H | 5180×2040×2455 |
| Braking distance (full load/no load) m | 3.5/4.5 | |
| Curb weight | 2860kg | |
| Rated passengers | 2 people | |
| Minimum ground clearance | 90mm | |
| Maximum travelling speed | 20km/h | |
| Wheel base( front/ rear) | 1520/1540mm | |
| Maximum gradient | 4% | |
| Wheel base | 2800mm | |
| Minimum turning radius | 10.0m | |
| Endurance mileage | 120KM | |
| Body system | Seat | Hyraulic shock-absorbing seats |
| Body, frame | Sheet metal body, vehicle electrophoresis, anti-corrosion painting automobile technology | |
| Instrument | Combined meters (speed, range, battery information, lighting, etc.) | |
| Rearview mirror | Manual external rearview mirror | |
| Lights and signals | Headlights, turn signals, combined rear taillights, brake lights, warning lights, horn | |
| Stereo | Car stereo combination | |
| Switch | Start switch, wiper switch, warning light switch | |
| Montior | GPS tachograph, car inside and outside monitoring | |
| Wiper system | Professional wiper device | |
| Traction device | Automatic traction device | |
| Steering wheel | Polyurethane foam steering wheel | |
| Door | Traction head electrophoretic door + toughened glass push-pull curtain, compartment driver central control door lock | |
| Windscreen | Special tempered laminated glass | |
| Chassis system | Power transmission system | Front and rear four-wheel drive |
| Steering system | Hydraulic power steering | |
| Front axle and suspension | Integral front axle, high strength plate spring, cylinder type hydraulic shock absorption | |
| Rear axle and suspension | Enhanced traction rear axle, high strength plate spring | |
| Gearbox | Synchronous flexible shaft shift mechanism | |
| Brake system | Gas push oil brake system, air brake parking brake | |
| Tire | 6.50R-16LT8 PR traction tire | |
| Paint | Automotive grade paint, computer paint, professional spraying equipment | |
| Tractor configuration and interior | ||
| Standard configuration | Tractor two-way door, driver central control lock | |
| Antique bronze bells | ||
| 6-QA-60A Two starting batteries | ||
| Warning lights, Video monitoring | ||
| MP3 player | ||
| Driver and safety officer communication loudspeaker | ||
| Safety belt driver's seat | ||
| Car air conditioner | ||
| Sightseeing train 24 seats configuration sheet | ||
| Technical parameter | Internal dimensions (L*W*H) | 7160×2020×2560 |
| Braking distance (full load/no load) m | 3.5/4.5 | |
| Curb weight | 1500+1500+1460 | |
| Rated passengers | 24+23+23 people | |
| Loading mass weight | 2040kg | |
| Maximum travelling speed | 20km/h | |
| Wheel base | 1590mm | |
| Maximum gradient | 10% | |
| Wheel base | 3580mm | |
| Minimum turning radius | 9m | |
| Minimum ground clearance | 70mm | |
| Body system | Seat | Solid wood seat |
| Frame | Solid frame welding | |
| Body | Vehicle electrophoresis, anti-corrosion painting automobile technology | |
| Instrument | Barometer, monitor the internal pressure of the air brake system | |
| Rearview mirror | Manual external rearview mirror | |
| Lights and signals | Vehicle LED lighting, including combined rear taillights, brake lights, warning lights, indoor overhead lights | |
| Stereo | Car audio combination (optional advertising machine, LED display) | |
| Pneumatic connection | Pneumatic rapid interface | |
| Protective device | Chain protection | |
| Traction device | Automatic traction device | |
| Chassis system | Power transmission system | Rely on tractor as power traction |
| Steering system | Four-wheel steering | |
| Front and rear axle and suspension | Automobile front and rear axle, high strength plate spring, cylinder type hydraulic shock absorption | |
| Brake system | Air brake system, cut-off air brake, parking brake | |
| Tire | 185R14LT8 PR | |
| Paint | Automotive grade paint, computer paint, professional spraying equipment | |
| Standard configuration | Cabin emergency brake switch | |
| Top LED interior, video surveillance | ||
| Top car stereo | ||
| The air brake system monitors the barometer | ||
| Safety officer seat | ||
| Safety officer and driver safety officer communication loudspeaker | ||
| Anti-tripping chain of the carriage | ||
Wide range of application
quality guarantee
1.Our company guarantees that the supplied vehicles are brand new, unused original qualified products, and ensure that the provided vehicles have good performance during their service life under normal maintenance conditions of correct installation and normal use.
2.Our company is committed to the quality standards of the supplied vehicles in accordance with the relevant national quality and technical standards and relevant laws and regulations and provisions of the implementation of the requirements, and not lower than the original manufacturer's quality assurance regulations and relevant supply standards for the supply of counterfeit and shoddy products.
after-sales service
1.Promise to provide permanent maintenance services, vehicle warranty for one year, after the warranty period to provide paid services.
2.Regular return visit maintenance: Telephone return visit every 3 months, timely understanding of the buyer's opinions and suggestions, in order to promote the company's after-sales service work to further improve.
After-sales proces
1.The customer provides product information, unit information and contact information by telephone or email message, and describes the cause of the problem to the manufacturer.
2.After receiving the information, the manufacturer will try to deal with it as soon as possible.
3.Provide a solution to the problem described by the customer until the customer is satisfied.
Workshop pictures
){kind=link}