| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | One Year |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 2 oil for fire engines (800 L tank ) - Legendary model | ||
| Technical parameters | Length * Width * Height (mm) | 4770*1610*2050 |
| Nominal crew(people) | 2 | |
| Maximum speed km/h | ≤27km/h | |
| Range of motion (km) | 60-80 (at road level) | |
| Safe ascent | 15% | |
| Minimum turning radius (m) | 7.3 m | |
| Minimum ground clearance (unladen and fully laden) mm | 140/130 | |
| Wheelbase | 2300 mm | |
| Copy wheels | Front 1350/ Rear 1290mm | |
| Braking distance (no load/fullload)M | 3.1/5.0 | |
| Drive parts | Engine | 4A13 Electric Motor Injection Control Unit |
| Fuel tank capacity (L) | 55 | |
| Moving | 1.3 country emission standard 5 | |
| Transmission | Five - speed change | |
| Front and rear suspension | MacPherson type independent suspension, leaf spring type non-independent suspension + hydraulic shock absorber cylinder type | |
| Rear axle | The only automobile with a fully floating rear axle with a rear axle speed ratio of 12.43 mph | |
| Technology transfers | Automotive Industries Drive Shaft Technologies | |
| Case configuration | Front limiter | Laminated glass |
| Places | Genuine leather fabric | |
| Rear view mirror | One manual outer rear view mirror on each side | |
| Upper body | Employees of the category of specialists for the automotive industry for environmental protection of thermal insulation of aluminum - plastic panels | |
| Floor | Aluminum alloy with pattern non-slip floor | |
Steering system |
Two-way rack and pinion steering system, automatic compensation function, electronic assistance directions | |
DC, lamp and signal |
72V/12V-400W headlights, turn signals, rear tail lights, horns, reversing fire alarms, special hazard warning lights | |
| Body | Automotive craft sheet metal case | |
| Fuel tank capacity (L) | 800(stainless steel tank, internal motherboard versions) | |
| Moment of rolling resistance of the door shutter | Pull the door latch | |
| Fire pump | Fuel Fire Pump | |
Frames |
Shot blasting to remove rust, phosphating etching, cathode electrophoresis, spraying car paint top |
|
Instrument cluster stand |
Instrument cluster table for car injection system, voltmeter electric dispenser, warning light, electric lock switch, combination switch speed dispenser. | |
Anti-lock braking system |
Front brake disc rear wheel hub four-wheel hydraulic brakes + hand brake, vacuum brakes | |
| Front axle and suspension | Independent suspension, coil spring + hydraulic shock cylinder type | |
| Rear axle and suspension | Composite rear axle, cylinder type hydraulic shock absorption system | |
| Tire diameter | 185R13 | |
| On board fire fighting equipment | |
| Categories | Quantity |
| 800L stainless steel tank | 1 |
| Water cannon | 1 |
| Cannon Car Fog Lights | 1 |
| 4 kg dry powder fire extinguisher | 2 |
| Fire hoses (25m) | 2 rolls |
| Fire of the ploughshare | 1 |
| Fire ax | 1 |
| Fire hydrant wrench | 1 |
| Fire of the ladle | 1 |
| DC switching current water syringe | Small group |
| Lubricating syringe water bloom | 1 set |
| Type 92 fire in accordance | 1 set |
| Fire helmet | 1 |
| Fire belt | 1 |
| Fire proof knife loading | 1 pair |
| Fire pump | 1 |
quality guarantee
1. Our company guarantees that the supplied vehicles are brand new, unused, original, qualified products and ensures that the provided vehicles have good performance during their service life under normal maintenance conditions of correct installation and normal use.
2. Our company is committed to the quality standards of the supplied vehicles in accordance with the relevant national quality and technical standards and relevant laws and regulations and provisions of the implementation of the requirements, and not lower than the original manufacturer's quality assurance regulations and relevant supply standards for the supply of counterfeit and shoddy products.
after-sales service
1. Promise to provide permanent maintenance services and a vehicle warranty for one year; after the warranty period, provide paid services.
2. Regular return visit maintenance: telephone return visit every 3 months, timely understanding of the buyer's opinions and suggestions, in order to promote the company's after-sales service work to further improve.
After-sales proces
1. The customer provides product information, unit information, and contact information by telephone or email message and describes the cause of the problem to the manufacturer.
2. After receiving the information, the manufacturer will try to deal with it as soon as possible.
3. Provide a solution to the problem described by the customer until the customer is satisfied.
){kind=link}