| Customization: | Available |
|---|---|
| Power: | Electric |
| Seating Capacity: | 14, 14 |
|
Still deciding? Get samples of US$ 20000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Electrical system | Electronic control | The 144V high-power permanent magnet controller has the function of over-temperature protection circuit, making the startup smoother and safer. (belt tight Emergency power-off switch device). |
| Battery | Original high-quality large-capacity deep-cycle lithium iron phosphate battery 144V/250AH , battery with remote monitoring (service life Long life, high mileage, easy maintenance), after-sales battery warranty of more than 3 years. | |
| Motor | Permanent magnet motor 144V/23KW high power and high torque water-cooled motor. | |
| Charger | Computer intelligent charger, input voltage 220V/180V , output 144V , 30 A. | |
| Charging time | 6-8 hours (discharge rate 80% ). | |
| Seats and others | Luxurious leather seats, small fire extinguisher plus safety chain and emergency power-off switch. (According to the national special equipment standard) | |
| Body configuration |
Front screen / glass | Special laminated glass for automobiles, tempered glass with internal film. |
| front of the car | LED welcome screen covering the top of the windshield | |
| wiper | Multi-speed wiper mechanism with wiper spray | |
| floor | Anti-slip floor leather for high-end luxury commercial vehicles | |
| rearview mirror | One manual exterior rearview mirror on the left and right | |
| canopy | Professional environmentally friendly aluminum-plastic panel coverings for automobiles, with reasonable leak-proof structural functions | |
| steering system | Automatic gap compensation function, electronic direction assist | |
| Body | The entire vehicle is a fully sheet metal stamped one-time formed metal body + body, roof, and chassis beams. It is an integrally welded load-bearing vehicle. body structure. 10 Glass door (the door has a steel frame and the door is sealed inside and outside with rubber strips). |
|
| other | Vehicle seat belts, emergency power-off switches, small fire extinguishers plus safety protection chains, etc. (according to the national special equipment Safety licensing standards) | |
| DC , lights and signals | 144V/12V-400W front lighting, turn signals, rear tail lights, horn, reversing buzzer | |
| dashboard | Injection molded vehicle instrument panel, voltmeter, electricity meter, instrument indicator light, electric lock switch, combination switch, speedometer | |
| Chassis | Enhanced mini car chassis, the vehicle chassis has a stabilizer bar. (After passing the speed bump, the ride is comfortable when turning, and the vehicle tilts The oblique force is evenly distributed to prevent rollover) |
|
| Braking System | Front disc, rear hub, four-wheel hydraulic brake (electronic power brake) + handbrake parking | |
| Front axle and suspension | Integrated front axle, coil spring + cylinder hydraulic shock absorber | |
| Rear axle and suspension | Integrated rear axle, cylinder hydraulic shock absorber | |
technic parameter |
tire diameter | Car vacuum tire 185R14 |
| Length * width * height mm | 5850mm*1900mm*2180mm | |
| Rated number of passengers (people) | 14 people | |
| Wheelbase | 3150mm | |
| Driving mileage(km) | ≥ 150km (flat road, constant speed) |
Automobile process sheet metal construction, integral seamless welding, the use of passenger car production process, more in line with the bearing operation.
Certifications
Workshop pictures
quality guarantee
1.Our company guarantees that the supplied vehicles are brand new, unused original qualified products, and ensure that the provided vehicles have good performance during their service life under normal maintenance conditions of correct installation and normal use.
2.Our company is committed to the quality standards of the supplied vehicles in accordance with the relevant national quality and technical standards and relevant laws and regulations and provisions of the implementation of the requirements, and not lower than the original manufacturer's quality assurance regulations and relevant supply standards for the supply of counterfeit and shoddy products.
after-sales service
1.Promise to provide permanent maintenance services, vehicle warranty for one year, after the warranty period to provide paid services.
2.Regular return visit maintenance: Telephone return visit every 3 months, timely understanding of the buyer's opinions and suggestions, in order to promote the company's after-sales service work to further improve.
After-sales process
1.The customer provides product information, unit information and contact information by telephone or email message, and describes the cause of the problem to the manufacturer.
2.After receiving the information, the manufacturer will try to deal with it as soon as possible.
3.Provide a solution to the problem described by the customer until the customer is satisfied.
Q1 Are you factory or trading company?
A:We are factory in Guizhou province,China,with more than 10 years of manufacturing experience
Q2 Do you support customized products?
A:We offer a wide range of customized products, which can be customized according to your requirements
Q3 How long is your production cycle?
A:Production cycle 30 days in peak season, 10-15 days in off-season
Q4 How about the trading term and payment term?
A:We can discuss this individually
){kind=link}