| Customization: | Available |
|---|---|
| Power: | Gasoline |
| Application: | Factory, Station, Wharf, Port, Airport, Mall, Hospital, School, Villa, Resort, Pedestrian Street, Hotel, Golf Course, Amusement Park, Scenic Spot |
|
Still deciding? Get samples of US$ 9800/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Production information
| 18 Seats Open Fuel Sightseeing Bus with rain curtain | ||
| Size parameters | Product model number | ZH-GQ23A |
| Passengers carried(including driver) | 18 (persons) | |
| Length * width *height (mm) | 5850 * 1900 * 2180 | |
| Wheelbase (mm) | 3150 | |
| Wheel base(front/rear) | Front 1620/ rear 1600 (mm) | |
| Quality parameters | Vehicle equipment mass | 1820kg |
| Total Mass | 3580kg | |
| Engine | 491Q EFI engine | |
| Tank capacity | 70 L | |
| Displacement | 2.3 Emission standards Country V | |
| Gearbox | Five-speed shift | |
| Front and rear suspension | Leaf spring type non-independent suspension + cylinder type hydraulic shock absorbers |
|
| Rear axle | Integral rear axle + cylinder shock absorbers | |
| Transmission technology | Industry automotive drive shaft technology | |
| Performance parameters |
Maximum speed(full load) | ≤27Km/h |
| Minimum turning radius | 8.0m | |
| Maximum climb(full load) | 18% or higher | |
| Parking capability (initial speed 20Km/h) | 5m | |
| Minimum clearance from ground(no load/full load) | 130/100 (mm) | |
| Carbody configuration |
Chassis | Automobile painting process, integrated chassis,whole vehicle pickling, phosphating treatment,anti-corrosionframe |
| Steering System | Turborod steering system, hydraulic power assist | |
| Suspension system | Integral front axle plus cylinder shock absorption, rear axle leaf spring |
|
| Braking performance | Dual circuit hydraulic brake, vacuum power brake |
|
| Tires | Car vacuum tire 185R13 | |
| Body | Sheet metal body | |
| Front windshield | Double glazing for cars | |
| Ceiling | Press forming + welding process. Pickling, phosphating treatment, cathodic electric permanent paint, corrosion and rust prevention process |
|
| A chair | Use an adjustable car seat + leather seat; Bus seat (optional) | |
| Stereo | Car stereo | |
| Instrument desk | The only instrument table for injection molding vehicles in the industry, special wiper for cars |
|
| Lights and Signals | Headlights, turn signals, brake lights, parking lights, car lights, car horns, rearview mirrors | |
| Humanized configurations | MP3 player, radio, etc. | |
Customized design, seats optional leather seats and bus seats
Customer customized production, diversified modeling
Certifications
After Sales Services
quality guarantee
1.Our company guarantees that the supplied vehicles are brand new, unused original qualified products, and ensure that the provided vehicles have good performance during their service life under normal maintenance conditions of correct installation and normal use.
2.Our company is committed to the quality standards of the supplied vehicles in accordance with the relevant national quality and technical standards and relevant laws and regulations and provisions of the implementation of the requirements, and not lower than the original manufacturer's quality assurance regulations and relevant supply standards for the supply of counterfeit and shoddy products.
after-sales service
1.Promise to provide permanent maintenance services, vehicle warranty for one year, after the warranty period to provide paid services.
2.Regular return visit maintenance: Telephone return visit every 3 months, timely understanding of the buyer's opinions and suggestions, in order to promote the company's after-sales service work to further improve.
After-sales process
1.The customer provides product information, unit information and contact information by telephone or email message, and describes the cause of the problem to the manufacturer.
2.After receiving the information, the manufacturer will try to deal with it as soon as possible.
3.Provide a solution to the problem described by the customer until the customer is satisfied.
Workshop pictures
Q1 Are you factory or trading company?
A:We are factory in Guizhou province,China,with more than 10 years of manufacturing experience
Q2 Do you support customized products?
A:We offer a wide range of customized products, which can be customized according to your requirements
Q3 How long is your production cycle?
A:Production cycle 30 days in peak season, 10-15 days in off-season
Q4 How about the trading term and payment term?
A:We can discuss this individually
){kind=link}